AMACO Square Kiln Posts, 1-5/8 in, Mullite, Cone 10
Features
- 1 5/8 x 1 5/8 in square posts in six heights, 1 to 6 in
- Mullite, rated to Cone 10 (2381°F) for bisque, low-fire and high-fire loads
- Hollow square core
- Mix heights to fit tall and short pieces in one load
- Three posts per shelf sit steady even on a shelf that isn't perfectly flat
- Works with AMACO Excel half shelves and any other kiln shelf
Getting started
- 1
Set the first layer of shelves on 1 in posts. Never set shelves or ware directly on the kiln floor.
- 2
Support each shelf on three posts, set in a triangle near the shelf's edges.
- 3
Line each post up directly above the post on the layer below, so the weight goes straight down.
- 4
Choose posts at least 1/2 in taller than the tallest piece on the shelf below.
- 5
Keep posts and shelves clear of the thermocouple.
- 6
Check posts for cracks and chips before each firing, and replace a damaged post.
Specifications
| Brand | AMACO |
|---|---|
| Size | 1 5/8 x 1 5/8 x 3 in |
| Material | Mullite |
| Max firing | Cone 10 (2381°F) |
| Use with | Any kiln shelf, including AMACO Excel half shelves |
| Height | 1 in, 2 in, 3 in, 4 in, 5 in, 6 in |
| Ships from | Old Potters · Middletown, NY |
| Delivery | Free shipping on orders $29.99+. Orders under $29.99 ship for $10. |
Overview
AMACO's square kiln posts hold your kiln shelves at the spacing each load needs. They are mullite, rated to Cone 10 (2381°F), and 1 5/8 inch square with a hollow square core. Choose from six heights, 1 to 6 inches, and mix them to fit tall and short work in the same firing. Set the first shelf on 1 inch posts so it sits above the kiln floor. Support each shelf on three posts, and line the posts up from one layer to the next so the weight goes straight down. They work with any kiln shelf, including AMACO's Excel half shelves.